LIGHT GRAY ZINK

Usage
Before use, carefully read the directions on the packaging and act accordingly.
Pre Treatment
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the
surface.
Treatment
The surface should be clean, dry and free of grease. The aerosol should have room temperature. Best
processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample.
Distance to the surface to be treated approximately 25 to 30 centimetre.
Apply the zinc spray in several thin layers. Before applying the next layer, again shake the aerosol. When
desired, after drying a primer and a lacquer can be applied.
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer
applied.