BIO-X- LIQUID can be applied by slug dosing or metering directly into
the sewage tank (i.e. Marine Sanitation Device (MSD), Collection, Holding and
Transfer system (CHTS) or other type of holding tank).
A more convenient method is to apply directly to galley and toilet facilities
(e.g. commodes, sink, shower and scuppers) as a pH neutral cleaner to replace harsh
acid, caustic and bleach based products which are all highly harmful to the normal
operation of any biological system.
BIO-X- LIQUID performs within a pH range of 5.5-8.5 and a
temperature range of 10-44o C. Extremes of pH and temperature, as well as wide
shifts in either parameter over a short period of time should be avoided.
Sewers – Holding Tanks : An initial dosage of 1 liter of BIO-X- LIQUID per
1000 liters of tank capacity should be added directly to the holding tank and allow at
least 24 hours after the initial application for the system to become properly activated.
For maintenance a dosage of 0,25 liter per 1000 liters of additional waste should
be added every 7 – 10 days.
Drains – Sewage Lines : When used as a cleaner about 100 ml. of BIO-X- LIQUID
should be applied every 8 – 10 days to each bowl, sink and drain in the same
manner as with any janitorial type cleaner.
Note: When used as a cleaner, BIO-X- LIQUID will achieve the maximum
results partly due to eliminating line blockage.
Appearance: White liquid culture.
Odor: Lightly perfumed.
Solubility: Complete in water.
Flash point: None
pH: 5.5 – 8.5
Store in a cool dry place. Keep container closed when not in use.